Realme C2 RMX1941 Flash File (Stock ROM) Download

Realme C2 RMX1941 Flash File

This is the Realme C2 RMX1941 Flash File Firmware, that can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, and stuck devices on the logo, or other software issues now. Use the SP Flash Tool on your PC (No login required) to flash your device by running the flash tool now in Realme C2 RMX1941 Flash File. This is a free service, so if you don’t have these credentials, please get in touch with me for help.

About phone

Feature Specification
Display 6.1 inches, 720 x 1560 pixels, IPS LCD
Processor MediaTek Helio P22 (12 nm)
RAM 2GB / 3GB
Storage 16GB / 32GB (expandable via microSD up to 256GB)
Rear Camera Dual: 13 MP, f/2.2, PDAF + 2 MP, f/2.4, depth sensor
Front Camera 5 MP, f/2.0
Battery 4000 mAh
Operating System Android 9.0 (Pie) with ColorOS 6 Lite
Dimensions 154.3 x 73.7 x 8.5 mm
Weight 166 g
SIM Dual SIM (Nano-SIM, dual stand-by)
Connectivity 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, GPS
Ports microUSB 2.0, 3.5mm headphone jack
Sensors Accelerometer, proximity, compass
Colors Diamond Black, Diamond Blue

 

Download Link

WhatsApp Contact

918668709402

How to flash?

How to flash Realme C2 using SP Flash Tool (Without AUTH)?

  • Download and install Mediatek Driver Autoinstaller on your computer (if the Mediatek Driver is already installed, skip this step).
  • Download the Stock ROM (firmware) of your Mediatek Device and extract it on the computer (you can find firmware from above link).
  • Download and extract SP Flash Tool on the computer. Once extracted, you will see the following files:
    • SmartPhone Flash Tool Extracted Files
  • Open flash_tool.exe to launch the tool.
  • Once SP Flash Tool is launched, click on the Scatter-Loading Button.
  • Locate and select the Scatter File (found in the Stock ROM of your device) and click on the Open button.
  • Untick the Preloader option (flashing the preloader.bin can brick the device).
  • Click on the Download Button to begin the flashing process.
  • Connect your Mediatek Device to the computer using the USB cable (make sure it is powered off). After connecting, press the Volume Down or Volume Up key so that SmartPhone Flash Tool can detect the device.
  • Once the computer detects your device, the flashing process will start automatically.
  • Once the flashing process is completed, a Green Ring will appear at the end.
  • Close the Flash Tool on the computer and disconnect the device.
  • Congratulations! You have successfully learned to flash or install Stock Firmware on Mediatek Devices.

Note: need to bypass auth for starting the flashing process, also install LiBUSB Drivers.

Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit

Leave a Comment