Poco X6 Engineering ROM Free Download

Poco X6 Engineering ROM is a special file for testing and enabling the many new features of the phone. most time used for repairing software-related problems like IMEI Broken Baseband problems, Hang logo, Bootloader locked, rollback firmware, and more.

About phone

Feature	Details
Brand	Poco
Model	X6
Launch Date	11th January 2024
Display Size	6.67 inches
Display Type	OLED
Refresh Rate	120 Hz
Resolution	1220 x 2712 pixels
RAM Options	8GB, 12GB
Internal Storage Options	256GB, 512GB
Operating System	Android 14 (HyperOS)
Processor	Qualcomm Snapdragon 7s Gen 2
Battery Capacity	5100 mAh
Battery Type	Non-removable
Fast Charging Support	Proprietary fast charging
Rear Camera Setup	Triple: 64MP (main) + 8MP (ultra-wide) + 2MP (macro)
Front Camera	16MP
IP Rating	IP54 (dust and water resistant)
Colors Available	Mirror Black, Snowstorm White

Download Link

Also – Poco X7 Flash File (Stock ROM) Download

WhatsApp Contact

918668709404

How to flash?

Step-by-Step Guide to Flash Poco X6 Engineering Firmware

Step 1: Download and Install Xiaomi Driver

Action: Download the latest Xiaomi USB drivers from the above link.
Installation: Run the installer and follow the on-screen instructions to complete the installation.

Step 2: Download, Extract & Install MI Flash Tool

Download: Obtain the MI Flash tool from a reliable source.
Extract: Use a file extraction tool (like WinRAR or 7-Zip) to extract the contents of the downloaded file.
Install: Navigate to the extracted folder and run the installer to install MI Flash on your computer.

Step 3: Run MI Flash Tool

Action: Open the MI Flash application by double-clicking its icon on your desktop or navigating to its installation folder.

Step 4: Select Platform

Action: In the MI Flash tool, select the appropriate platform option that corresponds to your device.

Step 5: Browse for ENG ROM Folder

Action: Click on the ‘Browse’ button in MI Flash and navigate to the folder where you have extracted the Engineering ROM files. Select this folder.

Step 6: Connect Phone in EDL Mode

Action: Power off your Poco X6. Then, connect it to your computer while holding specific button combinations (usually Volume Down + Power) to enter EDL (Emergency Download) mode.

Step 7: Refresh USB Port

Action: In MI Flash, click on ‘REFRESH’ to detect your connected device. Ensure that your device is recognized by the tool.

Step 8: Start the Flashing Process

Action: Once your device is detected, click on ‘FLASH’ to initiate the firmware flashing process.

Step 9: Log in with Mi Service Center ID

Action: A login popup will appear. Enter your Mi Service Center ID and password to proceed with the flashing process.

Step 10: Wait for Completion

Action: Allow the flashing process to complete. This may take a few minutes. Wait until you see a success message in MI Flash.

Step 11: Power On Device

Action: Once flashing is successful, disconnect your Poco X6 from the computer. Press and hold the Power button to turn it on.

By following these steps carefully, you can successfully flash the engineering firmware on your Poco X6. Always ensure you have backups of important data before proceeding with firmware changes.