Poco X7 Flash File (Stock ROM) Download
This is the Poco X7 Flash File Flash File Firmware, that can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, stuck devices on the logo, or other software issues now. Use the SP Flash Tool on your PC (login required) to flash your device by running the Flash tool now in Poco X7 Flash File mobile. This is a paid service, so if you don’t have these credentials, please get in touch with me for help.
About phone
Poco X7 Details information
| Feature | Details |
|---|---|
| Chipset | Mediatek Dimensity 7300 Ultra (4 nm) |
| CPU | Octa-core (4×2.5 GHz Cortex-A78 & 4×2.0 GHz Cortex-A55) |
| RAM Options | 8GB, 12GB |
| Storage Options | 128GB, 256GB, 512GB |
| SD Card Slot | No |
| Battery Capacity | 5500 mAh |
| Fast Charging | 45W |
| Operating System | HyperOS based on Android 14 |
| Display Resolution | 1220 x 2712 pixels |
| Water Resistance | Yes, IP68/IP69K (up to 2m for 24 hours) |
| Weight | 190 g |
| Dimensions | 162.3 x 74.4 x 8.2 mm |
| Colors Available | Black, White, Purple, Green |
| NFC Support | Yes (market/region dependent) |
| USB Type | USB Type-C 2.0, OTG |
| SIM Card Type | Nano-SIM, dual stand-by |
| Sensors | Fingerprint (under display), accelerometer, gyro, compass, proximity (ultrasonic) |
Download Link
WhatsApp Contact
918668709402
How to flash?
Requirements
- SP Flash Tool: Download and extract the latest version.
- Stock ROM: Ensure you have the correct stock firmware for your device.
- MediaTek USB Drivers: Install these on your PC.
- USB Cable: For connecting your device to the PC.
Steps to Flash
- Download and Extract SP Flash Tool:
- Download the SP Flash Tool from a reliable source and extract the contents to a folder on your computer.
- Download Stock ROM:
- Obtain the stock ROM for your specific device model and extract it. Locate the scatter file within this folder.
- Power Off Your Device:
- Turn off your Android device. If it has a removable battery, take it out.
- Run SP Flash Tool:
- Navigate to the extracted SP Flash Tool folder and run
Flash_tool.exeas an administrator.
- Navigate to the extracted SP Flash Tool folder and run
- Load Scatter File:
- In SP Flash Tool, click on the “Download” tab.
- Click on “Scatter-loading” and select the scatter file from the stock ROM folder.
- Prepare for Flashing:
- Before proceeding, ensure you have set up any necessary authentication bypass methods (this may vary based on your device and specific requirements).
- Start Flashing Process:
- Click on the “Download” button in the SP Flash Tool to initiate the flashing process.
- Connect Your Device:
- Connect your powered-off device to the PC using a USB cable while holding either the Volume Up or Volume Down button. This helps the tool recognize your device.
- Monitor the Flashing Process:
- The flashing process will begin, indicated by a progress bar in the SP Flash Tool. Wait until you see a green circle with “Download OK,” indicating successful flashing.
- Finish Up:
- Once completed, disconnect your device from the PC and close the SP Flash Tool.
- If applicable, reinsert the battery into your device if it was removed.
- Reboot Your Device:
- Power on your device. It should boot into the newly flashed firmware.
Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit
