Poco X7 Pro Flash File (Stock ROM) Free Download

Download the POCO X7 Pro Flash File Firmware from our website. With this file, you can unlock the device’s screen lock pattern and FRP and can upgrade or downgrade the device; also, the baseband, model, IMEI, and build number are unknown fixes. Always use the latest flash file to flash the POCO X7 Pro and check that the device model is always the same. Download the file with the direct download link given below and read all flashing instructions before flashing the phone.

About phone

Specification	Details
Brand	Poco
Model	X7 Pro Iron Man Edition
Display Size	6.73 inches
Display Type	1.5K Flat AMOLED
Refresh Rate	Up to 120Hz
Touch Sampling Rate	240Hz
Peak Brightness	3,200 nits
Protection	Corning Gorilla Glass 7i
Processor	MediaTek Dimensity 8400 Ultra
RAM Options	12GB
Storage Options	512GB UFS 4.0
Operating System	HyperOS 2 based on Android 15
OS Updates	Three years of OS updates
Security Updates	Four years of security updates
Rear Camera Setup	Dual: 50MP (Sony LYT-600) + 8MP Ultrawide
Front Camera	20 MP
Battery Capacity	6,550 mAh
Fast Charging Support	90W HyperCharge
Charging Time	0 to 100% in approximately 47 minutes
IP Rating	IP66 + IP68 + IP69 (dust and water resistant)
Connectivity Options	5G, Wi-Fi 6, Bluetooth 5.3, USB Type-C
Price (Starting)	$399 (approx. ₹34,000)

Download Link

Also – OPPO A31 (CPH2015) Firmware Flash File

WhatsApp Contact

918668709402

How to flash?

Requirements

A Windows PC (32 or 64-bit)
USB cable for your device
SP Flash Tool (download and extract)
Stock ROM (firmware) for your device (ensure it includes the scatter file)
MediaTek USB VCOM drivers installed on your PC

Step 1: Install MediaTek USB VCOM Drivers

Download the MediaTek USB VCOM drivers.
If you encounter issues during installation, disable driver signature enforcement:
- Go to Settings > Update & Security > Recovery.
- Click Restart Now under Advanced Startup.
- Select Troubleshoot > Advanced options > Startup Settings > Restart.
- Press F7 to disable signature verification.

Step 2: Prepare the Firmware

Download the stock firmware for your device and extract it on your computer.
Locate the scatter file within the extracted firmware folder.

Step 3: Launch the SP Flash Tool

Open the extracted SP Flash Tool folder and run flash_tool.exe it as an administrator.

Step 4: Load the Scatter File

In the SP Flash Tool, click on the Scatter-loading button.
Navigate to the folder containing your firmware and select the scatter file.
Ensure that the Preloader option is unticked to avoid bricking your device.

Step 5: Select Flashing Options

If you want to flash only specific partitions, select them accordingly in the tool.
For a full flash, ensure all relevant boxes are checked except for Preloader.

Step 6: Connect Your Device

Power off your MediaTek device completely.
Connect it to your PC via a USB cable while holding either the Volume Up or Volume Down button. This puts your device in BROM mode, allowing it to be detected by the tool.

Step 7: Start the Flashing Process

Click on the Download button in the SP Flash Tool to begin flashing.
Wait for the process to complete. A green ring will appear once flashing is successful.

Step 8: Final Steps

Once completed, disconnect your device from the PC.
Close the SP Flash Tool and reboot your device.