Redmi A3x Flash File (Stock ROM) Download
Here is a Redmi A3x Flash File Firmware. This file can be used to address various software issues affecting your phone, including deadboot, auto recovery mode problems, corrupted devices, bricked devices, and devices stuck on the logo.
To use the file, run the Upgrade Download Tool on your PC (login is not required). You can flash your device by running the flash tool in Redmi A3x Flash File mobile.
This is a free service, but if you do not have the necessary credentials, please contact me for assistance.
About phone
| Feature | Specification |
|---|---|
| Chipset (CPU) | Unisoc T603 (22 nm) |
| RAM | 3GB / 4GB |
| Battery | 5000mAh non-removable |
| Charging | Fast charging 10W |
| Internal Storage | 64GB / 128GB |
| Expandable Storage | A dedicated SD card slot is available |
Download Link
WhatsApp Contact
918668709402
How to flash?
Step-by-Step Guide: Install or Flash .pac Firmware (ROM) using SPD Upgrade Tool
- Install Spreadtrum USB Driver
- Download and install Spreadtrum USB Driver on your computer.
- Note: If the Spreadtrum Driver is already installed, skip this step.
- Download Stock Firmware
- Download the Stock Firmware (.pac based) for your Spreadtrum Device.
- Note: If you have already downloaded the Stock Firmware, skip this step.
- Extract SPD Upgrade Tool
- Download and extract the SPD Upgrade Tool on your computer.
- Once extracted, you will see the following files:
- Open UpgradeDownload.exe
- Open
UpgradeDownload.exefrom the extracted files.
- Open
- Load Packet
- Click on the Load Packet button.
- Locate .pac Firmware
- Locate and select the .pac firmware file on your computer.
- Connect the Device to the Computer
- Ensure your Spreadtrum mobile device is powered off.
- Connect the device to your computer using a USB cable.
- Start Downloading
- Click on the Start Downloading button to begin the installation or flashing process.
- Flashing Process
- The installation process will begin and may take a few minutes to complete.
- During the process, your device will restart automatically.
- Completion
- Once the installation is complete, you will see the Green Passed message.
- Disconnect Device
- Close the SPD Upgrade Tool.
- Disconnect your Spreadtrum device from the computer.
- Restart Device
- Restart your mobile device. It is now ready to use.
Congratulations! You have successfully installed or flashed the .pac firmware on your Spreadtrum device.
Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit
