Redmi K80 Pro Flash File (Stock ROM) Download

This is the Redmi K80 Pro Flash File Stock Firmware that can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, stuck devices on the logo, or other software issues now. Use the OPlusFlashTool on your PC (login required, because it comes with auth protection) to flash your device by running the flash tool now in Redmi K80. This is a paid service, so if you don’t have these credentials, please contact me for help.

About phone

Feature	Specification
Brand	Redmi
Model	K80 Pro
Release Date	November 27, 2024
Operating System	HyperOS 2.0 based on Android 15
Display Size	6.67 inches
Display Resolution	3200 x 1440 pixels
Display Type	AMOLED, 120Hz refresh rate
Processor	Qualcomm SM8750-AB Snapdragon 8 Elite (3 nm)
CPU Configuration	Octa-core (2×4.32 GHz Oryon V2 Phoenix L + 6×3.53 GHz Oryon V2 Phoenix M)
GPU	Adreno 830
RAM Options	12GB / 16GB
Storage Options	256GB / 512GB / 1TB (UFS 4.0)
Expandable Storage	No (no dedicated SD card slot)
Rear Camera Setup	Triple:
	– 50 MP (f/1.6, wide, OIS)
	– 32 MP (f/2.2, ultra-wide)
	– 50 MP (telephoto, f/2.0, 2.5x optical zoom)
Front Camera	20 MP
Battery Capacity	6550 mAh
Battery Type	Non-removable, silicon-carbon
Fast Charging	Yes, proprietary fast charging at 120W
Wireless Charging	Yes, supports up to 50W
Dimensions (mm)	160.26 x 74.95 x 8.39
Weight (g)	212
IP Rating	IP69 (dust and water resistant)
Connectivity Options	Wi-Fi 7, Bluetooth v5.4, NFC, Infrared, USB Type-C

Download Link

Download Link: Redmi K80 Pro Flash File & Tool

WhatsApp Contact

918668709402

How to flash?

Step 1: Boot into EDL Mode

Power off your Redmi A4 5G.
Use a specialized tool or method (like a test point or a deep flash cable) to boot your device into EDL mode.

Step 2: Connect to PC

Connect your phone to your computer using a USB cable.

Step 3: Launch the MiFlash Tool

Open the MiFlash tool on your PC.

Step 4: Load Fastboot ROM

Click on the Select button in MiFlash and navigate to the folder containing the extracted Fastboot ROM.

Step 5: Choose Flashing Option

Select one of the following options:
- Clean All: Wipes all data.
- Save User Data: Keeps user data intact.
- Clean All and Lock: Wipes data and locks the bootloader.

Step 6: Start the Flashing Process

Click on the Flash button in MiFlash. The flashing process will begin.

Step 8: Wait for Completion

Wait for the process to complete. A success message will appear once done.

Step 9: Reboot Your Device

Once flashing is complete, your device should automatically reboot. If not, you can manually reboot it by disconnecting and reconnecting the device.

Note: In the the future, I will update the EDL test point; now you need to boot the device in EDL mode and follow the official method.