Redmi Note 13 Pro plus (zircon) China To Global [FREE]
if you have a Redmi Note 13 Pro plus (zircon) mobile running the Chinese ROM or if you’re using a Chinese variant, you can easily convert it to a global version. For this, you’ll need the global ROM, which I will provide for free in the download section.
Features:
- Redmi Note 13 Pro Plus (zircon)
- China to Global without unlocking the bootloader
- No need to unlock the bootloader
- Fix the “The System Has Been Destroyed” error
About phone
Specification | Details |
---|---|
Model | Redmi Note 13 Pro+ 5G |
Processor | MediaTek Dimensity 7200-Ultra (4nm) |
CPU | Octa-core, up to 2.8 GHz |
GPU | Mali-G610 |
RAM Options | 8GB / 12GB LPDDR5 |
Storage Options | 256GB / 512GB UFS 3.1 |
Display | 6.67″ CrystalRes AMOLED |
Resolution | 2712 x 1220 pixels, 446 PPI |
Refresh Rate | Up to 120Hz |
Brightness | Peak brightness of 1800 nits |
Rear Camera | Triple: 200MP (main, f/1.65, OIS) + 8MP (ultra-wide) + 2MP (macro) |
Front Camera | 16MP, f/2.4 |
Battery Capacity | 5000mAh |
Charging Speed | Supports 120W HyperCharge |
Operating System | MIUI 14 based on Android 13 |
Dimensions | Height: 161.4mm, Width: 74.2mm, Thickness: 8.9mm |
Weight | 204.5g |
IP Rating | IP68 (water and dust resistant) |
Connectivity Options | Dual SIM, Wi-Fi 6, Bluetooth 5.3, NFC |
Audio Features | Dual speakers with Dolby Atmos |
Download Link
WhatsApp Contact
918668709402
How to flash?
Step-by-Step Instructions for Flashing Xiaomi Device from China to Global Using MiFlash Tool Redmi Note 13 Pro plus (zircon)
Requirements:
- A Windows PC
- Xiaomi Mi Flash Tool installed
- Fastboot ROM for your device (Global version)
- USB cable
- Xiaomi USB drivers installed on your PC
Instructions:
- Download and Install Mi Flash Tool:
- Download the latest version of the Xiaomi Mi Flash Tool from the official website.
- Extract the downloaded zip file and run the
MiFlashSetup.msi
file to install it on your computer.
- Download Fastboot ROM:
- Download the Fastboot ROM for your specific Xiaomi device (ensure it’s the Global version).
- Extract the downloaded firmware to a folder on your computer.
- Prepare Your Device:
- Power off your Xiaomi device completely.
- Boot into Fastboot Mode by pressing and holding the
Volume Down (-)
andPower
buttons simultaneously for about 6-8 seconds until you see the Fastboot screen.
- Connect Your Device:
- Connect your device to the computer using a USB cable while in Fastboot mode.
- Open Mi Flash Tool:
- Launch the Mi Flash Tool on your PC.
- Click on the
Select
button in the tool and navigate to the folder where you extracted the Fastboot ROM. Select this folder.
- Refresh Device Connection:
- Click on the
Refresh
button in Mi Flash Tool to ensure it recognizes your connected device. You should see your device listed in the tool.
- Click on the
- Choose Flashing Option:
- At the bottom right corner of the tool, select one of the following options:
- Clean All: This option will wipe all data and install a clean version of the firmware.
- Save User Data: This option will keep your user data intact while flashing.
- Clean All and Lock: This option will wipe data and lock the bootloader (not recommended if you’re switching from China to Global).
- At the bottom right corner of the tool, select one of the following options:
- Start Flashing Process:
- Once you have selected your desired option, click on the
Flash
button to begin the flashing process. - Wait for the process to complete; this may take several minutes.
- Once you have selected your desired option, click on the
- Completion Message:
- Once flashing is successful, you will see a success message in the Mi Flash Tool.
- Disconnect your device from the computer.
- Reboot Your Device:
- Your device should automatically reboot after flashing. If it doesn’t, you can manually reboot it by pressing and holding the Power button.
Note: you need to bypass the AUTH only charge 1 credit
Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit