Xiaomi 15 Pro Flash File (Stock ROM) Download

Xiaomi 15 Pro Flash File (Stock ROM) Download

This is the Xiaomi 15 Pro Flash File Firmware, which can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, stuck devices on the logo, or other software issues. Use the Mi Flash Tool on your PC (login required, Because it comes with auth protection) to flash your device by running the flash tool now in Xiaomi 15 Pro mobile. This is a paid service, so if you don’t have these credentials, please contact me for help.

About phone

Feature Xiaomi 15 Pro
Brand Xiaomi
Model 15 Pro
Release Date 29th October 2024
Display 6.73-inch AMOLED, 3200×1440 pixels, 120 Hz
Processor Snapdragon 8 Elite (octa-core)
RAM 12GB
Storage 256GB
Operating System HyperOS 2 based on Android
Battery Capacity 6100 mAh
Fast Charging 90W Fast Charging
Wireless Charging Yes, supports 50W wireless charging
Rear Camera Setup Triple: 50MP (main) + 50MP (ultra-wide) + 50MP (telephoto)
Front Camera 32MP
Dimensions 161.30 x 75.30 x 8.35 mm
Weight 213 grams
IP Rating IP68 (dust and water resistant)
Connectivity Options Wi-Fi 7, Bluetooth v5.40, NFC, Infrared, USB OTG
Colors Available Bright Silver Edition, Rock Ash, Spruce Green, White

Download Link

WhatsApp Contact

918668709400

How to flash?

How to flash using the miflash tool Xiaomi 15 smartphone?

Preparation

  1. Install Mi Flash Tool:
    • Download and install the Mi Flash Tool on your Windows PC.
    • Run the tool as an administrator.
  2. Download Firmware:
    • Download the Fastboot ROM specific to your Xiaomi 15 Pro model.
    • Extract the downloaded firmware using a tool like 7-Zip.
  3. Enable USB Debugging:
    • Go to Settings > About Phone and tap on MIUI Version it seven times to unlock Developer Options.
    • In Settings > Additional Settings > Developer Options, enable USB Debugging.

Flashing Process

  1. Boot into Fastboot Mode:
    • Power off your device.
    • Press and hold the Volume Down + Power buttons simultaneously until you see the Fastboot logo.
  2. Connect Device to PC:
    • Connect your Xiaomi 15 Pro to your PC using a USB cable.
  3. Open Mi Flash Tool:
    • Launch the Mi Flash Tool on your PC.
  4. Select Firmware:
    • Click on the Select button in the Mi Flash Tool.
    • Navigate to the folder where you extracted the firmware and select it.
  5. Choose Flashing Options:
    • Choose one of the following options based on your needs:
      • Clean All: Wipes all data and installs firmware (recommended).
      • Save User Data: Keeps user data intact (not recommended for major updates).
      • Clean All and Lock Wipes data and locks the bootloader, which is not advisable if you want to keep it unlocked.
  6. Refresh Device List:
    • Click on the Refresh button in the Mi Flash Tool to detect your device.
  7. Start Flashing:
    • Once your device is detected, click on the Flash button to start the flashing process.
    • Wait for the process to complete; it may take several minutes.
  8. Reboot Device:
    • After flashing, your device will automatically reboot. If it doesn’t, you can manually reboot it by holding down the Power button.
Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit

Leave a Comment