Motorola Moto E14 XT2421-14 Flash File Download

Download Motorola Moto E14 XT2421-14 Flash File Firmware from our website. With this file, you can unlock the device’s screen lock pattern and FRP and upgrade or downgrade the device. It also fixes the baseband, model, IMEI, and build number unknown. Always use the latest flash file to flash the Motorola Moto E14 XT2421-14 check device; always the model is the same. Download the file with the direct download link given below and read all flashing instructions before flashing the phone.

About phone

Feature Moto E14
Launch Date Expected June 2024
Model Number XT2421-14
Processor Unisoc T606
Display 6.56 inches, 720 x 1612 pixels, 90Hz IPS LCD
RAM 2 GB
Storage 64 GB
Rear Camera 13 MP
Front Camera 5 MP
Battery Capacity 5,000 mAh
Charging Speed 15W wired
Operating System Android v14
Dimensions 163.5 x 74.5 x 8 mm
Weight 178 g
Colors Available Pastel Green, Graphite Gray, Pastel Purple
Water Resistance Yes, IP52 (splash proof)

Download Link

WhatsApp Contact

918668709402

How to flash?

Steps to Flash Moto E14

  1. Install SPD USB Driver:
    • If you haven’t installed the SPD USB driver, download it and install it on your computer.
  2. Download and extract firmware:
    • Download the .pac firmware file for the Moto E14.
    • Extract the downloaded firmware package to a folder on your computer.
  3. Extract and Launch SPD Upgrade Tool:
    • Download and extract the SPD Upgrade Tool.
    • Open the folder where you extracted it and run.UpgradeDownload.exe
  4. Load Firmware into the Tool:
    • In the SPD Upgrade Tool, click on the Load Packet button.
    • Navigate to the folder where you extracted your .pac firmware file and select it.
  5. Prepare Your Device:
    • Ensure your Moto E14 is powered off.
    • Connect your Moto E14 to the computer using a USB cable.
  6. Start Flashing Process:
    • In the SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
    • The tool will show progress; this may take several minutes.
  7. Completion of Flashing:
    • Once the flashing process is complete, you will see a “Passed” message in the tool.
    • Disconnect your Moto E14 from the computer.
  8. Reboot Your Device:
    • Power on your Moto E14. It may take some time to boot up for the first time after flashing.
Facebook
LinkedIn
WhatsApp
Pinterest
Reddit

Leave a Comment