Redmi 5A MIUI 11 Flash File (Stock Rom) Download

Redmi 5A MIUI 11 Flash File (Stock Rom) Download

This is the Redmi 5A MIUI 11 Flash File Firmware, that can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, stuck devices on the logo, or other software issues now. Use the MiFlash Tool on your PC to flash your device by running the flash tool now in Redmi 5A mobile. This is a free service, so if you don’t need any credentials, please get in touch with me for help.

 

About phone

Feature Details
SoC (Processor) Qualcomm Snapdragon 425
RAM 2GB / 3GB
Storage 16GB / 32GB
Display 5-inch HD (720p)
Battery 3000mAh
Rear Camera 13MP
Front Camera 5MP
Operating System MIUI 9 (based on Android)
Design/Cosmetic Minor cosmetic changes from Redmi 4A
Performance Good for entry-level phone
Battery Life Great
Camera Performance Acceptable for front and rear
Bloatware Some pre-installed apps (bloatware)
Price Low, budget-friendly

Download Link

WhatsApp Contact

918668709402

How to flash?

How To Flash Redmi 5A Mobile

  1. Download and Extract the Firmware File
    • Download the correct firmware file for your Xiaomi device.
    • Extract the downloaded file to a location on your computer.
  2. Copy File Folder to Desktop
    • After extracting the file, copy the entire folder to your desktop for easy access.
  3. Run Xiaomi Flash Tool
    • Open the Xiaomi Flash Tool on your computer.
  4. Select File Location in the Tool
    • In the Xiaomi Flash Tool, browse and select the folder where you copied the firmware files.
  5. Tick on Clean All
    • In the tool, make sure to tick the option “Clean All” to ensure a fresh installation without any leftover data.
  6. Connect Your Device in EDL Mode
    • Put your Xiaomi device in EDL (Emergency Download Mode).
    • To do this, power off your device and connect it to your PC while holding the appropriate button combination for EDL mode (usually volume down and power buttons, depending on the model).
  7. Click on Refresh
    • In the Xiaomi Flash Tool, click on the “Refresh” button.
    • This will detect and list your connected phone in the tool.
  8. Click on Flash
    • Once your device is listed, click on the “Flash” button to start the flashing process.
  9. Wait for Flash Completion
    • The flashing process will take some time. Wait until the tool shows a “Flash complete” message.
  10. Disconnect and Reboot Your Device
  • Once the flashing is successful, disconnect your phone from the PC and reboot it.
  1. All Done!
  • Your Xiaomi device should now be successfully flashed and ready to use.

Make sure to follow the steps carefully to avoid any issues during the flashing process!

Facebook
LinkedIn
WhatsApp
X
Pinterest
Reddit

Leave a Comment