Redmi 7A Miui 12 Flash File (Stock ROM) Download

Redmi 7A Flash File

This is the Redmi 7A Miui 12 Flash File Firmware, that can be used to fix deadboot, auto recovery mode problems, corrupted devices, bricked devices, and stuck devices on the logo, or other software issues. Use the Mi Flash Tool New version on your PC (login required) to flash your device by running the flash tool now in Redmi 7A Miui 12 Flash File. This is a paid service, so if you don’t have these credentials, please get in touch with me for help.

If you have a UMT dongle then using QcFire Qualcomm module you can free flash your device, no need dongle or box or any extra tool.

About phone

Feature Description
Model Redmi 7A
Tagline Smart Desh Ka Smartphone
Processor Qualcomm® Snapdragon™ 439 Octa-core processor
Battery 4000mAh (typ) two-day battery
Rear Camera 12MP AI Sony IMX486
Display 13.8cm (5.45) HD+ display


Download Link

WhatsApp Contact


How to flash?

How to Flash Redmi 7A


  1. Download Xiaomi 7A Flash File: Ensure you have the correct flash file for your Redmi 7A model.
  2. Download & Install MI Flash Tool: Make sure the MI Flash Tool is installed on your PC.
  3. Place the Flash File on Desktop: Keep the flash file folder easily accessible, preferably on your desktop.

Flashing Process:

  1. Connect Phone:
    • Connect your Redmi 7A to the PC using a USB cable.
    • Unplug the battery from the phone.
  2. Short Test Point:
    • Short the Test Point on the motherboard.Redmi 7A Testpoint
    • While holding the Test Point shorted, reconnect the battery.
  3. Verify Connection:
    • Open Device Manager on your PC.
    • Check for the Qualcomm HS USB QLoader 9008 port. This indicates your phone is correctly in EDL (Emergency Download Mode).
  4. Run MI Flash Tool:
    • Open the MI Flash Tool on your PC.
  5. Assign Folder Path:
    • In the MI Flash Tool, assign the path to the flash file folder located on your desktop.
  6. Refresh and Flash:
    • Click on the ‘Refresh’ button in MI Flash Tool to detect the connected device.
    • Once the device is detected, click on the ‘Flash’ button to start the flashing process.

Final Steps:

  1. Wait for Flashing to Complete:
    • The flashing process will take some time. Wait until it is completed.
  2. Reboot Your Device:
    • Once the flashing process is finished, reboot your device.
  3. Initial Setup:
    • Follow the on-screen instructions to set up your Redmi 7A.

Note: You need to authorized tool to flash Redmi 7A Mobile Contact Me on WhatsApp.

WhatsApp me for login +918668709402 (if required)

(Please check if the ROM file suffix is ‘.tgz’. If it is ‘.gz’, please rename it to ‘.tgz’)

If you facing any problem or error on flashing your device you can Contact Me. I will help you.

Follow Us On Facebook Click Here


Leave a Comment